Nortel 2001 Installation And Operation Manual page 323

Nortel IP Audio Conference Phone 2033
IP address, subnet mask, default Gateway, and TFTP Server IP address) are
retrieved from the DHCP server.
The IP Audio Conference Phone 2033 password, node ID and TN must be
entered manually from the dialpad.
For more information about DHCP servers, see Converging the Data
Network with VoIP (553-3001-160).
Go to Procedure 49, "Installing an IP Audio Conference Phone 2033 for the
first time using DHCP" on
Dynamic IP address assignment — Full DHCP
For a full DHCP installation, all parameters (IP Phone IP address, subnet
mask, default Gateway, Connect Server IP address, port number, action, and
retry count) are retrieved from the DHCP server to recognize the IP Audio
Conference Phone 2033.
The IP Audio Conference Phone 2033 password, node ID, and TN must be
entered manually from the dialpad.
For more information on how to set up DHCP servers for use with the
IP Audio Conference Phone 2033, refer to Converging the Data Network with
VoIP (553-3001-160).
Go to Procedure 49, "Installing an IP Audio Conference Phone 2033 for the
first time using DHCP" on
Procedure 48
Installing an IP Audio Conference Phone 2033
for the first time using manual configuration
1 Configure a virtual loop on the system using LD 97.
For more information, see Software Input/Output: Administration
(553-3001-311).
2 Configure the IP Audio Conference Phone 2033 on the system using
LD 11. At the prompts, enter the following:
REQ:chg
TYPE:i2001
page 331.
page 331.
IP Phones Description, Installation, and Operation
Page 323 of 430