Page 350 of 430
Table 43
Power requirements for Phase II IP Phones using Power over Ethernet Classification 2
IP Phone
2001
2002
2004
2033
Note 1: Heavy load is defined as all LEDs on and 1kHz tone on speaker.
Note 2: Normal load is defined as set powered up.
Table 44
Power requirements for IP Phone 2007 using Power of Ethernet Classification 3
IP Phone
2007
Note 1: Heavy load is defined as all LEDs on and 1kHz tone on speaker.
Note 2: Normal load is defined as set powered up.
553-3001-368
Standard 7.00
Appendix A: Specifications
Table 43 provides power requirements for Phase II IP Phones using Power
over Ethernet Classification 2.
Product Code
NTDU90BA
NTDU91BA
NTDU92BA
NTEX11AA
Table 44 provides power requirements for the IP Phone 2007 using Power
over Ethernet Classification 3.
Product Code
NTDU96AB
August 2005
Maximum Load
5.0 W
5.0 W
6.0 W
5.0 W
Maximum Load
6.0W
Normal Load
3.4 W
3.4 W
3.6 W
3.4 W
Normal Load
3.6 W