Full Duplex Mode - Nortel 2001 Installation And Operation Manual

Page 336 of 430
Table 42
IP Audio Conference Phone 2033 IP parameters
Parameter
IP Address
Net Mask
Default Gateway
Connect Server (IP address, port,
action and retry count — primary
and secondary)
User ID (Node ID, Node Password
and TN)

Full Duplex mode

553-3001-368 Standard 7.00
Nortel IP Audio Conference Phone 2033
• finding a default Gateway server
• authenticating the user
Table 42 lists a summary of the IP parameters and how they are obtained.
Note: For all static IP address assignments, your system administrator
provides the network information.
Method of Acquisition
Manually entered or automatically retrieved through
Partial or Full DHCP.
Manually entered or automatically retrieved through
Partial or Full DHCP.
Manually entered or automatically retrieved through
Partial or Full DHCP.
Manually entered or automatically retrieved through Full
DHCP.
Manually entered for first-time configuration. Retrieved
from local storage on subsequent power cycles.
Note: Your system administrator provides the
information to enter.
In the Configuration menu, Auto Negotiate mode is the default setting for
initial startup. Typically, the IP Phone is connected to a network that supports
Auto Negotiate, and it selects the best speed and duplex mode available.
There is no intervention required under normal operation.
If the IP Phone is connected to a network configured for Full Duplex mode
only, it is not able to automatically negotiate the proper configuration. To
August 2005