Installation And Configuration Overview - Nortel 2001 Installation And Operation Manual

Page 344 of 430

Installation and configuration overview

553-3001-368 Standard 7.00
SIP Phone
A SIP Phone must be installed and properly configured before it can be used.
SIP Phone configuration involves configuration on the phone itself and
configuration on the Signaling Server.
• Follow the manufacturer's installation and configuration instructions to
set up your SIP Phone.
• To configure a SIP Phone on the Signaling Server, refer to IP Peer
Networking: Installation and Configuration (553-3001-213) which
provides the required configuration procedures for adding a SIP Phone
user endpoint to the Signaling Server using the Network Routing Service
(NRS) Manager.
August 2005