(For Windows 98 Platforms); Procedure 38 - Nortel 2001 Installation And Operation Manual

5 Run the IP Softphone 2050 Configuration Utility (from the Windows
Control Panel) to assign a server address, select sound devices, and
select a server type.
Note: Compare the values currently in the configuration utility to the
values recorded prior to the upgrade. These should be identical.
6 Select Start > Programs > Nortel > IP Softphone 2050 to start the IP
Softphone 2050 application.

Procedure 38

Upgrading the IP Softphone 2050 on your PC

(for Windows 98 platforms)

1 Record all values from the Communication Server tab in the IP
Softphone 2050 Configuration Utility.
a. Select the IP Softphone 2050 Configuration Tool from the
Windows Control Panel.
b. Select the Communication Server tab.
c. Record all the values on this tab.
d. Exit the IP Softphone 2050 Configuration Utility.
2 Start your IP Softphone 2050 application and record the Node and TN
values displayed at startup.
If these values pass too quickly to write down, follow the steps below:
a. Press the Services button (the globe button on the IP Softphone
2050 toolbar).
b. Press the down-arrow key to highlight Set Info.
c. Press the Select softkey.
d. Press the down-arrow key to highlight Set TN.
e. Record this value.
f. Press the down-arrow key to highlight Node IP and Node ID.
The Node IP should match the value in the IP Softphone 2050
Configuration Utility's Communication Server tab (retrieved from
step 1).
Nortel IP Softphone 2050
End of Procedure
IP Phones Description, Installation, and Operation
Page 223 of 430