•
Connected
•
Acquired
•
Authorizing
•
Held
•
Authorized
•
Dbl Authd
DeviceID
The system administrator uses this option to check the user name configured
for the device that is sent to the switch for authentication. This should match
the corresponding entry in the RADIUS Server.
Authenticator ID
The system administrator uses this option to check the MAC address of the
Authenticator (switch).
Accessing Network Diagnostic Utilities from the IP Phone
Local diagnostics are available from the IP Phone for either Local or Remote
mode.
Note: Diagnostics prompts are presented in English.
Local Mode
When the IP Phone is not registered with the signaling server, the Network
Diagnostic Tools menu is available from the IP Phone in Local Mode (see
Table 47 on
phone.
Use Procedure 57 on
Local mode.
Appendix D: IP Phone diagnostic utilities
page
368). This menu is controlled by the firmware on the IP
page 372
to access the Network Diagnostic Tools in
IP Phones
Description, Installation, and Operation
Page 371 of 430