Show Dot1X - D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manual

show dot1x

The show dot1x Privileged EXEC mode command displays the 802.1X status of the device or specified interface.
Syntax
show dot1x [ethernet interface]
Parameters
•
interface — Valid Ethernet port. (Full syntax: port)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the status of 802.1X-enabled Ethernet ports.
Console# show dot1x
802.1x is enabled
Port Admin Mode
---- ----------
1 Auto
2 Auto
3 Auto
4 Force-auth
5 Force-auth
* Port is down or not present.
Console# show dot1x ethernet 3
802.1x is enabled.
Oper Mode Reauth
Control
--------- -------
Authorized Ena
Authorized Ena
Unauthorized Ena
Authorized Dis
Unauthorized* Dis
Page 328
802.1x Commands
Reauth Username
Period
------ --------
3600 Bob
3600 John
3600 Clark
3600 n/a
3600 n/a