Show Authentication; Show Authentication Users; Show Dot1X - D-Link DWL-8500AP Command Reference Manual

show authentication

This command displays the ordered authentication methods for all authentication login lists.
Format
Mode
Authentication Login List The authentication login listname.
Method 1
Method 2
Method 3

show authentication users

This command displays information about the users assigned to the specified authentication
login list. If the login is assigned to non-configured users, the user "default" will appear in the
user column.
Format
Mode
User
Component

show dot1x

This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
configuration for a specified port and the dot1x statistics for a specified port - depending on
the tokens used.
Format
Mode
If you do not use any of the optional parameters, the global dot1x configuration summary is
displayed.
Administrative mode Indicates whether authentication control on the switch is enabled or
Supplicant Allowed in Guest VLAN Indicates whether the Guest VLAN for supplicants
Example:
The following shows example CLI display output for the command.
(DWS-3026) #show dot1x
Administrative Mode............... Disabled
Supplicant Allowed In Guest Vlan.. Disabled
show authentication
Privileged EXEC
The first method in the specified authentication login list, if any.
The second method in the specified authentication login list, if any.
The third method in the specified authentication login list, if any.
show authentication users <listname>
Privileged EXEC
The user assigned to the specified authentication login list.
The component (User or 802.1x) for which the authentication login list is
assigned.
show dot1x [{summary {<slot/port> | all} | detail <slot/port> |
statistics <slot/port>]
Privileged EXEC
disabled.
feature is enabled or disabled.
Port-Based Network Access Control Commands
2 Switching Commands
79