Configuring Igmp Versions; Configuring Static Joining - 3Com S7906E Configuration Manual

Configuring IGMP Versions

Because the protocol packets of different IGMP versions vary in structure and type, the same IGMP
version should be configured for all routers on the same subnet before IGMP can work properly.
Configuring an IGMP version globally
Follow these steps to configure an IGMP version globally:
To do...
Enter system view
Enter public instance IGMP view or
VPN instance IGMP view
Configure an IGMP version globally
Configuring an IGMP version on an interface
Follow these steps to configure an IGMP version on an interface:
To do...
Enter system view
Enter interface view
Configure an IGMP version on
the interface

Configuring Static Joining

After an interface is configured as a static member of a multicast group or a multicast source and group,
it will act as a virtual member of the multicast group to receive multicast data addressed to that multicast
group for the purpose of testing multicast data forwarding.
Follow these steps to configure an interface as a statically connected member of a multicast group or a
multicast source and group:
To do...
Enter system view
Enter interface view
Configure the interface as a
static member of a multicast
group or a multicast source and
group
Use the command...
system-view
igmp [ vpn-instance
vpn-instance-name ]
version version-number
Use the command...
system-view
interface interface-type
interface-number
igmp version version-number
Use the command...
system-view
interface interface-type
interface-number
igmp static-group
group-address [ source
source-address ]
1-10
Remarks
—
—
Optional
IGMPv2 by default
Remarks
—
—
Optional
IGMPv2 by default
Remarks
—
—
Required
An interface is not a static
member of any multicast group
or multicast source and group
by default.