3Com S7906E Configuration Manual page 1041

BS period
BS timeout
An ACL rule for register message filtering
Register suppression time
Register probe time
The ACL rule, and sequencing rule for an SPT switchover
Enabling PIM-SM
With PIM-SM enabled, a router sends hello messages periodically to discover PIM neighbors and
processes messages from the PIM neighbors. When deploying a PIM-SM domain, you are
recommended to enable PIM-SM on all non-border interfaces of the routers.
Enabling PIM-SM globally in the public instance
Follow these steps to enable PIM-SM in the public instance:
To do...
Enter system view
Enable IP multicast routing
Enter interface view
Enable PIM-SM
Enabling PIM-SM in a VPN instance
Follow these steps to enable PIM-SM in a VPN instance:
To do...
Enter system view
Create a VPN instance and
enter VPN instance view
Configure a route-distinguisher
(RD) for the VPN instance
Enable IP multicast routing
Enter interface view
Enable PIM-SM
Use the command...
system-view
multicast routing-enable
interface interface-type
interface-number
pim sm
Use the command...
system-view
ip vpn-instance
vpn-instance-name
route-distinguisher
route-distinguisher
multicast routing-enable
interface interface-type
interface-number
pim sm
1-19
Remarks
—
Required
Disable by default
—
Required
Disabled by default
Description
—
—
Required
Not configured by default
Required
Disabled by default
—
Required
Disabled by default