Configuring File Management - 3Com 7700 Configuration Manual

All sectors will be erased, proceed? [confirm]y
Format flash: completed
2 Display the working directory in the flash.
<SW7700> cd flash:/
<SW7700> pwd
flash:/
3 Create a directory named test.
<SW7700> mkdir test
4 Display the flash directory information after creating the test directory.
<SW7700> dir
Directory of *
0
523776 bytes total (476160 bytes free)
Configuring File The management module configuration file provides a user-friendly operation
Management interface. It saves the configuration of the switch in text format in command line
format for a record of the whole configuration process. You can view the
configuration information.
The format of configuration file includes:
■
■
■
■
■
Management over the configuration files includes:
■
■
■
Display the Current-configuration and Saved-configuration of the
Ethernet Switch
After being powered on, the system will read the configuration files from Flash.
(Such configuration files are called saved-configuration files). If there is no
configuration file in Flash, the system begins the initialization with the default
parameters. Relative to the saved-configuration, the configuration in effect during
the operating process of the system is called current-configuration. You can use
the commands in Table 5 to display the current-configuration and
saved-configuration of the Ethernet switch.
drw- 0 Mar 09 2002 12:01:44
Saved in the command format.
Only non-default constants will be saved
The commands are based on command views. The commands are sorted in
one section. The sections are separated with a blank line or a comment line (A
comment line begins with an exclamation mark "# ").
Generally, the sections in the file are arranged in the following order: system
configuration, ethernet port configuration, vlan interface configuration,
routing protocol configuration and so on.
It ends with "end".
Display the Current-configuration and Saved-configuration of Ethernet Switch
Save the Current-configuration
Erase the configuration files from the Flash Memory
File System Management
test
3