Displaying And Maintaining Ipv6 - 3Com E4500-24 Cli Configuration Manual

To do...
Enter system view
Configure the hop limit of
ICMPv6 reply packets

Displaying and Maintaining IPv6

To do...
Display the FIB entries
Display the mapping between
host name and IPv6 address
Display the brief IPv6 information
of an interface
Display neighbor information
Display the total number of
neighbor entries satisfying the
specified conditions
Display information about the
routing table
Display information related to a
specified socket
Display the statistics of IPv6
packets and IPv6 ICMP packets
Display the statistics of IPv6 TCP
packets
Display the IPv6 TCP connection
status
Display the statistics of IPv6
UDP packets
Clear IPv6 neighbor information
Clear the statistics of IPv6
packets
Clear the statistics of all IPv6
TCP packets
Clear the statistics of all IPv6
UDP packets
Use the command...
system-view
ipv6 nd hop-limit value
Use the command...
display ipv6 fib
display ipv6 host
display ipv6 interface [ interface-type
interface-number | brief ]
display ipv6 neighbors [ ipv6-address | all |
dynamic | interface interface-type
interface-number | static | vlan vlan-id ] [ | { begin
| exclude | include } regular-expression ]
display ipv6 neighbors { all | dynamic | static |
interface interface-type interface-number | vlan
vlan-id } count
display ipv6 route-table [ verbose ]
display ipv6 socket [ socktype socket-type ]
[ task-id socket-id ]
display ipv6 statistics
display tcp ipv6 statistics
display tcp ipv6 status
display udp ipv6 statistics
reset ipv6 neighbors [ all | dynamic | interface
interface-type interface-number | static ]
reset ipv6 statistics
reset tcp ipv6 statistics
reset udp ipv6 statistics
1-14
Remarks
—
Optional
64 by default.
Remarks
Available in
any view
Available in
user view