Table of Contents
Advertisement
4.2.7 Factory Default
You can reset the configuration of the Managed PoE+ Switch on this page. Only the IP configuration is retained. The new
configuration is available immediately, which means that no restart is necessary. The Factory Default screen in
appears.
Button
: Click to reset the configuration to Factory Defaults.
To reset the Managed PoE+ Switch to the Factory default setting, you can also press the hardware-based
reset button at the front panel about 5 seconds.
Figure 4-2-14: Factory Default Configuration Page Screenshot
61
User's Manual of FGSW-Series
Figure 4-2-14
Advertisement
Table of Contents
Need help?
Do you have a question about the FGSD-1008HPS and is the answer not in the manual?