♦ Baud: 115200
♦ Data bits: 8
♦ Parity: None
♦ Stop bits: 1
♦ Flow control: None
This management method is often preferred because you can remain connected and monitor the system during system reboots.
Also, certain error messages are sent to the serial port, regardless of the interface through which the associated action was
initiated. A Macintosh or PC attachment can use any terminal-emulation program for connecting to the terminal serial port. A
workstation attachment under UNIX can use an emulator such as TIP.
Figure 3-2: COM Port Configuration
37
User's Manual of FGSW-Series
Need help?
Do you have a question about the FGSD-1008HPS and is the answer not in the manual?