Factory Default; System Reboot - Planet Networking & Communication GS-6320 Series User Manual

4.10.8 Factory Default

You can reset the configuration of the Managed Switch on this page. Only the IP configuration is retained. The new
configuration is available immediately, which means that no restart is necessary. The Factory Default screen in
appears.
Buttons
: Click to reset the configuration to Factory Defaults.
: Click to return to the Port State page without resetting the configuration.
To reset the Managed Switch to the Factory default setting, you can also press the hardware reset button
at the front panel about 10 seconds. After the device is rebooted, you can login the management Web
interface within the same subnet of 192.168.0.xx.

4.10.9 System Reboot

The Reboot page enables the device to be rebooted from a remote location. Once the Reboot button is pressed, user has to
re-login the Web interface about 60 seconds later; the System Reboot screen in
User's Manual of GS-6320 and MGS-6320 Managed Switches
Figure 4-10-8: Factory Default Page Screenshot
Figure 4-10-9: System Reboot Page Screenshot
450
Figure 4-10-9 appears.
Figure 4-10-8