Clear Command; Config Command - Planet Networking & Communication FGSD-1008HPS User Manual

6.1 Clear Command

Command Lists:
clear
acl
igmp_snooping
ip
ipv6
mac_table
mib_counter
mld_snooping
poe
syslog
system
vlan

6.2 Config Command

Command Lists:
config config command, key in '?' to show the list
account Used to config account information.
acl Used to config ACL.
bandwidth_ctrl Used to set the bandwidth parameters of ports.
cos Used to config cos function.
dhcprelay Used to config dhcprelay.
double-vlan Used to config double VLAN.
gvrp Used to config gvrp information.
igmp_snooping Used to config IGMP snooping.
imp_table Used to config IMP-table.
ip Used to config IP information.
ipv6 Used to config IPv6 information.
link_aggregation Used to config link aggregation.
lldp Used to config LLDP.
loop-detect Used to config loop detect information.
mac_table Used to config MAC-table.
mirror Used to set mirror port function and method.
mld_snooping Used to config MLD snooping.
clear command, key in '?' to show the list.
Used to clear ACL table.
Used to clear entries of IGMP snooping.
Used to clear IPv4 settings.
Used to clear IPv6 settings.
Used to clear dynamic entries of MAC-table function by port.
Used to clear MIB counters.
Used to clear entries of MLD snooping.
Used to clear poe informations.
Used to clear server information of syslog.
Used to clear system information.
Used to clear entry of protocol VLAN.
189
User's Manual of FGSW-Series