Firmware Update - Planet Networking & Communication FGSD-1008HPS User Manual

4.2.9 Firmware Update

This page facilitates an update on the firmware controlling the switch as the Web Firmware Upgrade screen in
appears.
To open Firmware Upgrade screen, perform the following:
1. Click System -> Firmware Upgrade.
2. Click the "
3. Select on the firmware then click "
status.
4. Once the software is loaded to the system successfully, the following screen appears. The system will load the new
software after reboot.
DO NOT Power OFF
Figure 4-2-17: Web Firmware Update Page Screenshot
"button of the Main Page, the system would pop up the file selection menu to choose firmware.
the Managed PoE+ Switch until the update progress is complete.
", the Software Upload Progress would show the file with upload
63
User's Manual of FGSW-Series
Figure 4-2-17