Planet Networking & Communication FGSD-1008HPS User Manual page 67

Port Settings
• Port
• State
• IP of Device to Check
Buttons
: press this button to take effect.
: press this button to refresh information.
System is going to check the PD again according to the reboot time. If ou can
not make sure precisely booting time, we suggest you to set it longer.
Select specific PoE port for further configuration and list all ports on this page.
Enable or disable specific PoE port PoE Alive Check function and display
current status of eachPoE port.
This column allows user to set PoE device IP address here for system making
ping to the PoE device. Please be noticed that the PD's IP address must be set
to the same network segment with Managed PoE+ Switch.
Also display current setting of eachPoE port.
67
User's Manual of FGSW-Series