Poe Port Sequential - Planet Networking & Communication FGSD-1008HPS User Manual

4.3.3 PoE Port Sequential

This page allows the user to configure the PoE Ports started up interval time as the PoE Port Sequential configuration screen in
Figure 4-3-5 appears.
The page includes the following fields:
Object
• Port Selection
•
State
• Delay xxx Seconds
• (Max. 300)
• Port
• State
• Delay Time (Seconds)
Buttons
: press this button to take effect.
: press this button to refresh information.
Figure 4-3-5: PoE Port Sequential Configuration Page Screenshot
Description
Select specific PoE port for further configuration.
Enable or disable specific PoE Port sequential function.
This column allows user to configure the PoE Port Start Up interval time.
Delay time range is from 1 seconds to 300 seconds.
Display per PoE port list.
Display per PoE port operation status.
Display per PoE port delay time (seconds) setting.
68
User's Manual of FGSW-Series