Factory Default; System Reboot - Planet Networking & Communication IGS-6325 Series User Manual

4.7.1.8 Factory Default

You can reset the configuration of the Industrial Managed Switch on this page. Only the IP configuration is retained. The new
configuration is available immediately, which means that no restart is necessary. The Factory Default screen in
appears.
Buttons
: Click to reset the configuration to Factory Defaults.
: Click to return to the Port State page without resetting the configuration.
To reset the Industrial Managed Switch to the Factory default setting, you can also press the hardware
reset button at the front panel about 10 seconds. After the device is rebooted, you can login the
management Web interface within the same subnet of 192.168.0.xx.

4.7.1.9 System Reboot

The Reboot page enables the device to be rebooted from a remote location. Once the Reboot button is pressed, user has to
re-login the Web interface about 60 seconds later; the System Reboot screen in
Buttons
Figure 4-7-1-10: Factory Default Page Screenshot
Figure 4-7-1-11: System Reboot Page Screenshot
363
User's Manual of IGS-6325 series
Figure 4-7-1-11 appears.
Figure 4-7-1-10