Planet Networking & Communication FGSD-1008HPS User Manual page 200


IP address has been changed or admin password has been forgotten –
Solution:
To reset the IP address to the default IP address "192.168.0.100" or reset the login password to default value, press the
hardware-based reset button on the front panel for about 5 seconds. After the device is rebooted, you can log in to the
management Web interface within the same subnet of 192.168.0.xx.
Figure 9-1: FGSD-1008HPS Reset Button
Figure 9-2: FGSW-1816HPS Reset Button
Figure 9-3: FGSW-2624HPS Reset Button
Figure 9-4: FGSW-2624HPS4 Reset Button
200
User's Manual of FGSW-Series