Create Command; Default Command - Planet Networking & Communication FGSD-1008HPS User Manual

neighbor Used to config neighbor MACID information.
ntp Used to config the attributes of ntp.
poe Used to config poe.
ports Used to config the attributes of ports.
qosaging Used to config Qos aging.
qosmode Used to config Qos function.
qosremap Used to config Qos remap function.
snmp Used to config snmp information.
storm_ctrl Used to config storm control.
stp Used to config STP.
stp-loop-detect Used to config STP loop detect information.
syslog Used to config syslog.
system Used to config system information.
vlan Used to config VLAN.
voice-vlan Used to config voice VLAN.

6.3 Create Command

Command Lists:
create create command, key in '?' to show the list
acl Used to create a new profile of ACL.
igmp_snooping Used to create a new entry of IGMP snooping.
imp_table Used to create a new entry of IMP-table.
mac_table Used to create a new entry of MAC-table.
mld_snooping Used to create a new entry of MLD snooping.
snmp Used to create snmp information.
stp Used to create a new entry of STP.
vlan Used to create a new entry of VLAN.

6.4 Default Command

Command Lists:
default default command, key in '?' to show the list
all Load factory default .
190
User's Manual of FGSW-Series