Qos Mode Set - Planet Networking & Communication FGSD-1008HPS User Manual

4.6.3 QoS Mode Set

This page allows you to configure the QoS mode settings for Managed PoE+ Switch as the QoS mode settings screen in
4-6-3 appears.
The page includes the following fields:
Object
• Group
• Queue Mode
• Queue Method
• Queue Ratio (0-255)
• Queue Maximum
Bandwidth (0-255)
• Unit (BW Throttle
Period/TWRR Tickle
Unit)
Button
: press this button to take effect.
Figure 4-6-3 : QoS Mode Set Configuration Page Screenshot
Description
Display Group A and Group B.
Select the Queue Mode for QoS and the available options are shown below:
First-In-First-Out
WRR/WFQ/Bwassure/Bwlimit/TWRR
SPx1 WRR/WFQ/Bwassure/Bwlimit/TWRRx7
SPx2 WRR/WFQ/Bwassure/Bwlimit/TWRRx6
SPx4 WRR/WFQ/Bwassure/Bwlimit/TWRRx4
SPx8
Select the Queue Method for QoS and the available options are shown below:
WRR
WFQ
Bwassure
Bwlimit
TWRR
Set Queue Ratio for each mode and the available range is 0-255.
Set Queue maximum bandwidth and the available range is 0-255.
Set Queue Ratio Unit for each mode and the available options are shown below:
64Kbps/51.2ms
1Mbps/3.1ms
2Mbps/1.55ms
4Mbps/0.82ms
101
User's Manual of FGSW-Series
Figure