Rep 3.6 Tray 1 Left Guide Assembly - Xerox DocuPrint N2025 Service Manual

REP 3.6 Tray 1 Left Guide Assembly

Parts List on PL 3.1
Removal
Switch off the power and disconnect the Power Cord.
1. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it from
light.
2. Remove Tray 1.
3. Remove the Left Side Cover (REP 1.1).
4. Remove the MBF Assembly (REP 2.1).
5. Remove the Retard Chute Assembly (REP 3.1).
6. From the left side of the printer, disconnect P/J201 from the Tray 1 Size Sensor (Figure 1).
7. Remove the six screws that secure the Tray 1 left Guide Assembly to the printer (Figure
1).
8. Use a small screwdriver to pry up on the locking tab that locks the guide assembly to the
bottom of the printer (Figure 1).
9. Disconnect P/J202 and P/J127 from the guide assembly (Figure 1).
10. Remove the Tray 1 Left Guide Assembly.
Repair-Adjustment
REP 3.6
WARNING
Figure 1 Tray 1 Left Guide Assembly
Replacement
1. Reinstall the components in the reverse order.
NOTE: Ensure that all alignment pins are properly inserted in the frame holes before
replacing the six screws.
02/2000
4-22
Initial Issue
DocuPrint N2025/N2825