Rep 4.5 Lower Paper Guide Assembly; Rep 4.6 Printer Motor Cover - Xerox Telecopier 7017 Technical Reference Manual

REP 4.5 Lower Paper Guide
Assembly
Parts List on PL 4.3
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Open printer.
4. Remove recording paper.
5. Remove lower paper guide assembly.
a. Remove the screw securing left side
of lower paper guide assembly.
NOTE: Set this screw (from left side of lower
paper guide assembly) aside, it is longer than
the other black screws.
b. Remove the screw securing right side
of lower paper guide assembly.
c. Remove lower paper guide assembly.
Replacement
1. Position three locating tabs in cutouts in
base frame.
2. Reinstall remaining components
reverse order.
REP 4.5, 4.6

REP 4.6 Printer Motor Cover

Parts List on PL 4.3
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Open printer.
4. Remove recording paper.
5. Remove lower paper guide assembly (REP
4.5).
6. Remove printer motor cover.
a. Remove printer motor cover from LH
frame.
b. Remove printer motor cover.
Replacement
1. Position two locating tabs in cutouts in
base frame.
2. Position locating pin in LH frame.
3. Reinstall remaining
reverse order.
in
12/88
4-26
www.printcopy.info
components in
Telecopier 7017 / 7017SF