System Customizations; Headset Use - Yealink SIP-T29G User Manual

System Customizations

Headset Use

Note
Headset Mode Activation/Deactivation
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
The entries in the enabled search source lists whose name or phone number matches the
characters entered will appear on the LCD screen. You can press
the desired entry and then place a call to the entry.
If you want to use a wired headset, physically connect your headset to the phone and activate
the headset mode for use. For more information on physically connecting a headset, refer to
Phone Installation on page 20.
If you want to use a wireless headset, insert the Bluetooth
back of the IP phone. For more information on using a Bluetooth headset, refer to
87.
provides an introduction to wired headset use.
This section
If both a Bluetooth headset and a wired headset are connected, only the Bluetooth headset can
be used.
To use headset, make sure the headset mode is enabled. Contact your system administrator for
more information.
To activate the headset mode:
Press on the phone.
1.
The HEADSET key LED illuminates solid green and the headset icon
screen.
Press the line key or the Answer soft key to answer an incoming call. The call will be
connected to your headset automatically.
Enter the desired number and then press the Send soft key, the phone will then place a call
using the headset automatically. For more information on using the headset to place a call,
refer to Placing Calls on page 121.
Customizing Your Phone
or to scroll to
USB dongle into the USB port at the
Bluetooth
appears on the idle
on page
85