Exporting The Log Files To A Local Pc - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
If you leave it blank, the phone will upload the local log files to the provisioning server.
If you configure a relative URL (for example, /upload), the phone will upload the local log files by
extracting the root directory from the access URL of the provisioning server.
If you configure an absolute URL with the protocol (for example, tftp), the phone will upload the local
log files using the desired protocol. If no protocol, the phone will use the same protocol with auto pro-
visioning for uploading files.
Example:
static.auto_provision.local_log.backup.path = tftp://10.3.6.133/upload/
Note: It works only if "static.auto_provision.local_log.backup.enable" is set to 1 (Enabled).
Permitted
URL within 1024 characters
Values
Default Blank
Parameter static.auto_provision.local_log.backup.append
It configures whether the uploaded local log files overwrite the existing files or are appended to the
Description
existing files.
0-Overwrite
Permitted
Values
1-Append (not applicable to TFTP Server)
Default 0
Parameter static.auto_provision.local_log.backup.append.limit_mode
It configures the behavior when local log files on the provisioning server or a specific server reach the
Description
maximum file size.
0-Append Delete, the server will delete the old log and the phone will continue uploading log.
Permitted
Values
1-Append Stop, the phone will stop uploading log.
Default 0
Parameter static.auto_provision.local_log.backup.append.max_file_size
It configures the maximum size (in KB) of the local log files can be stored on the provisioning server or
Description
a specific server.
Permitted
Integer from 200 to 65535
Values
Default 1024
Parameter static.auto_provision.local_log.backup.bootlog.upload_wait_time <y0000000000xx>.cfg
It configures the waiting time (in seconds) before the phone uploads the boot log file to the pro-
Description
visioning server or a specific server after startup.
Permitted
Integer from 1 to 86400
Values
Default
120

Exporting the Log Files to a Local PC

Procedure
1. From the web user interface, navigate to Settings > Configuration.
2. In the Enable Local Log field, select Enabled or ON.
537
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg