Tr-069 Device Management - Yealink SIP-T2 Series Administrator's Manual

To configure the minimum and maximum RTP port via web user interface:
Click on Network->Advanced.
1.
In the Local RTP Port block, enter the max and min RTP port in the Max RTP
2.
Port(1~65535) and Min RTP Port(1~65535) field respectively.
Click Confirm to accept the change.
3.
A dialog box pops up to prompt that the settings will take effect after a reboot.
Click OK to reboot the phone.
4.

TR-069 Device Management

TR-069 is a technical specification defined by the Broadband Forum, which defines a mechanism
that encompasses secure auto-configuration of a CPE (Customer-Premises Equipment), and
incorporates other CPE management functions into a common framework. TR-069 uses
common transport mechanisms (HTTP and HTTPS) for communication between CPE and ACS
(Auto Configuration Servers). The HTTP(S) messages contain XML-RPC methods defined in the
standard for configuration and management of the CPE.
TR-069 is intended to support a variety of functionalities to manage a collection of CPEs,
including the following primary capabilities:
Auto-configuration and dynamic service provisioning

Software or firmware image management

Status and performance monitoring

Diagnostics

The following table provides a description of RPC methods supported by IP phones.
Configuring Advanced Features
767