Tr-069 Device Management; Supported Rpc Methods - Yealink SIP-T2 Series Administrator's Manual

Values
Default Blank
Web UI Network->Advanced->802.1x->Device Certificates
Parameter static.network.802_1x.proxy_eap_logoff.enable
It enables or disables the 802.1x-logoff feature for the PC port.
Description
Note: It is not applicable to CP920 IP phones.
0-Disabled
Permitted
Values
1-Enabled, the 802.1x logoff message is sent to the authenticator when the PC is disconnected.
Default 0
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.

TR-069 Device Management

TR-069 is a technical specification defined by the Broadband Forum, which defines a mechanism that encompasses
secure auto-configuration of a CPE (Customer-Premises Equipment), and incorporates other CPE management func-
tions into a common framework. TR-069 uses common transport mechanisms (HTTP and HTTPS) for communication
between CPE and ACS (Auto Configuration Servers). The HTTP(S) messages contain XML-RPC methods defined in the
standard for configuration and management of the CPE.
For more information on TR-069, refer to
Topics

Supported RPC Methods

TR069 Configuration
Supported RPC Methods
The following table provides a description of RPC methods supported by IP phones.
RPC Method
GetRPCMethods This method is used to discover the set of methods supported by the CPE.
SetParameterValues This method is used to modify the value of one or more CPE parameters.
GetParameterValues This method is used to obtain the value of one or more CPE parameters.
GetParameterNames This method is used to discover the parameters accessible on a particular CPE.
GetParameterAttributes This method is used to read the attributes associated with one or more CPE parameters.
SetParameterAttributes This method is used to modify attributes associated with one or more CPE parameters.
Reboot This method causes the CPE to reboot.
This method is used to cause the CPE to download a specified file from the designated loc-
ation.
File types supported by IP phones are:
Download
l
l
Yealink TR-069
Firmware Image
Configuration File
[1]
<y0000000000xx>.cfg
Technote.
Description
Phone Network
57