Call Forward; Call Forward Settings Configuration - Yealink T54S Administrator's Manual

T54S/T52S/T48S/T48G/T46S/T46G/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27
G/T19(P) E2 IP phones. It works only if "features.allow_mute" is set to 1 (Enabled).
0-The mute feature is automatically deactivated when the active call ends.
Permitted
1-The mute state is kept until you change the mute state manually or the phone
Values
restarts.
0
Default

Call Forward

You can forward calls from any line on your phone to a contact. There are two ways of forwarding your
calls:
Forward calls in special situations, such as when the phone is busy or there is no answer, or

forwarding all incoming calls to a contact immediately.
You can set the phone not to forward a call coming from authorized numbers.
Manually forward an incoming call to a number.

Topics

Call Forward Settings Configuration

Call Forward Feature Configuration
Call Forward Synchronization for Server-side Configuration
Call Forward Settings Configuration
You can change the following call forward settings:
Enable or disable the call forward feature. If disabled, the users have no permission to configure call

forward on their phone.
Choose a call forward mode. You can configure call forward for all lines or specific lines.

Allow or disallow users to forward an incoming call to an international telephone number (the prefix

is 00).
Enable or disable forward emergency feature and specify forward authorized numbers. These

numbers will not to be forwarded when the call forward feature is enabled. The incoming call will
not be logged in the Forwarded Calls list.
Enable or disable the display of the Diversion header. The Diversion header allows the phone which

receives a forwarded-call to indicate where the call was from.
The following table lists the parameters you can use to change the call forward settings.
features.fwd.allow
Parameter
It enables or disables the call forward feature.
Description
Call Features
<y0000000000xx>.cfg
331