To Enable Call Forward In Custom Mode - Yealink SIP-T40P User Manual

the F orward to field.
3) (Optional.) Enter the always forward on code or off code respectively in
the O n Code or O f f Code field.
b) If you select Bus y Forward:
1) Press
F orward field.
2) Enter the destination number you want to forward incoming calls to when
the phone is busy in the F orward t o field.
3) (Optional.) Enter the busy forward on code or off code respectively in the
O n Code or O f f Code field.
c) If you select No A nswer Forward:
1) Press
A nswer Forward field.
2) Enter the destination number you want to forward unanswered incoming
calls to in the F orward to field.
3) Press
before forwarding from the A f ter Ring Time field.
The default ring time is 12 seconds.
4) (Optional.) Enter the no answer forward on code or off code respectively
in the O n Code or O f f Code field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon on the status bar indicates that the call forward is enabled.
To e nable call forward in custom mode:
1. Press Me nu->Features->Call Forward.
or , or the Switch soft key to select Enabled from the Busy
or , or the Switch soft key to select Enabled from the No
or , or the Switch soft key to select the ring time to wait
Basic Call Features
87