Ip Addressing Mode Configuration; Ipv4 Configuration - Yealink T58A Administrator's Manual

• IPv6 Configuration

IP Addressing Mode Configuration

The following table lists the parameter you can use to configure IP addressing mode.
Parameter static.network.ip_address_mode
Description It configures the IP addressing mode.
Permitted
0-IPv4
Values
1-IPv6
2-IPv4 & IPv6
Default
0
Web UI Network > Basic > Internet Port > Mode(IPv4/IPv6)
Phone UI
IP Mode
[1]
If you change this parameter, the device will reboot to make the change take effect.

IPv4 Configuration

The following table lists the parameters you can use to configure IPv4.
Parameter
Description
Permitted Values 0-DHCP
Default
Web UI
Phone UI
Parameter
Description
Permitted Values IPv4 Address
Default
> Settings > Device Settings > Network (default password: admin) > WAN Port >
static.network.internet_port.type
It configures the Internet port type for IPv4.
Note: It works only if "static.network.ip_address_mode" is set to 0 (IPv4) or 2 (IPv4 &
IPv6).
2-Static IP
0
Network > Basic > IPv4 Config > Configuration Type
> Settings > Device Settings > Network (default password: admin) > WAN
Port > IPv4 Type
static.network.internet_port.ip
It configures the IPv4 address.
Note: It works only if "static.network.ip_address_mode" is set to 0 (IPv4) or 2 (IPv4 &
IPv6), and "static.network.internet_port.type" is set to 2 (Static IP).
Blank
[1]
<MAC>.cfg
[1]
<MAC>.cfg
[1]
<MAC>.cfg
| Device Network | 11