Edk Configuration; Edk List Configuration - Yealink SIP-T5 Series Administrator's Manual

Macro Action

EDK Configuration

To configure the EDK list, EDK user input prompt, EDK soft keys, and custom DSS keys, you have to enable EDK
feature. By default, the EDK feature is disabled.
Yealink phones can display the softkey ID or menu item ID by long pressing the Volume Up key. It is especially use-
ful for those users who need to view the softkey ID or menu item ID when configuring EDK macros.
The following graphic shows an example for displaying the softkey ID and menu item ID after accessing the menu
of T46S/G phones:
The following table lists the parameters you can use to configure EDK.
Parameter features.enhanced_dss_keys.enable
Description It enables or disables the Enhanced DSS Keys (EDK) feature.
Permitted
0-Disabled
Values 1-Enabled
Default 0
Parameter edk.id_mode.enable
It enables or disables to view the softkey or menu item ID by long pressing the Volume Up key for
three seconds on any screen.
Description
Note: The menu item ID is displayed on the status bar of the phone. Long pressing the Volume Up key
again for three seconds to exit. It works only if "features.enhanced_dss_keys.enable" is set to 1
(Enabled).
Permitted
0-Disabled
Values 1-Enabled
Default
0

EDK List Configuration

Using the Enhanced DSS Keys (EDK) List parameters to define a macro is useful when defining more than one soft
key or DSS key.
The following table lists the parameters you can use to configure the EDK list.
Note: The last "color" can be configured without "time", and it means per-
manently displaying the last color until triggered by other macros. This macro
can be only used for BLF/BLF list feature. For more information, refer to
BLF/BLF List Key LED Status and Behavior
Description
Configuration.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
275