User Access Level Configuration - Yealink VP59 Administrator's Manual

Administrator's Guide for VP59/SIP-T58A/CP960 IP Phones
Permitted
String within 32 characters
Values
Default
var
Parameter static.security.user_password
It configures the password.
The phone uses "user" as the default user password, "var" as the default var password and "admin" as
the default administrator password.
The valid value format is <username>:<new password>.
Example:
Description
static.security.user_password = user:123 means setting the password of user to 123.
static.security.user_password = admin:456 means setting the password of administrator to 456.
static.security.user_password = var:789 means setting the password of var to 789.
Note: The phones support ASCII characters 32-126(0x20-0x7E) in passwords. You can set the pass-
word to be empty via the web user interface only.
Permitted
String within 32 characters
Values
Default Blank
Web UI Security > Password
Settings > Advanced Settings (default password: admin) > Set Password
Phone UI
Note: You cannot change the user password via the phone user interface.

User Access Level Configuration

For more information, refer to
The following table lists the parameters you can use to configure the user access level.
Parameter static.security.var_enable
Description It enables or disables the 3-level access permissions (admin, user, var).
Permitted 0-Disabled
1-Enabled
Values
Default 0
Parameter static.web_item_level.url
Description It configures the access URL of the file, which defines 3-level access permissions.
Permitted
URL within 511 characters
Values
Default
Blank
Parameter static.security.default_access_level
It configures the default access level to access the phone user interface.
Description
Note: It works only if "static.security.var_enable" is set to 1 (Enabled).
0-user
Permitted
Values
1-var
92
Yealink SIP IP Phones Configuration Guide for User Access
[1]
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Level.