i-PRO WJ-NX510K Series Operating Instructions Manual page 93

[Setup via recorder's main monitor]
■ Other setup
[Make the frame rate of the pre-event recording to the frame rate of the
event recording]
Check to set the frame rate of the pre-event recording to the frame rate of the event
recording. Uncheck to return the frame rate to the standard settings (the frame rate of the
schedule recording). The setting is only effective for our cameras.
[Do not send the bit rate setting to a camera for which the same frame rate
is set for the basic setup, event recording and emergency recording]
The bit rate setting is not sent to the camera for which the same frame rate is set for each
recording when it is checked. The setting is only effective for our cameras.
[Extend an event recording during "MotionAlarm" of ONVIF event]
When checked, the event recording that starts with "MotionAlarm" in the ONVIF event
notified by the camera will be extended for the duration set in the event recording duration
unless an end notification is received from the camera.
Configure the advanced settings for schedule recording [Advanced schedule setup]
☞
89