[Setup via recorder's main monitor]
The screen returns to the [Camera setup] tab.
Set the black and white switchover of the camera [Day & Night (IR/
electrical)]
Select the day and night setting for each camera and transmit the information to the
cameras to change the camera settings.
Clicking the [Setup >] button for "Day & Night (IR/electrical)" on the [Camera setup] tab
will display the setup window.
Important:
● When the auto slow shutter is set, the frame rate may drop. Noise or white
dots (scratches) may also be seen in image.
Note:
● When "Max. 16/30s" is selected, the electronic sensitivity will automatically
be enhanced up to 16 times.
● When "Off" is selected for "AGC", this function is not available. Refer to the
operating instructions of the camera for further information.
51