i-PRO WJ-NX510K Series Operating Instructions Manual page 290

[Operation via recorder's main monitor]
be paused.)
Periods for which no recorded images are available will be displayed in black.
[Time-saving playback]
When it is checked, the recorded image is automatically played up to 4 times faster if there
is no movement in the image. Remove the check mark if
you want to play the image at normal speed. If you activate the time-saving playback, the
screen is displayed with the box always checked.
Set up the main monitor [Main monitor]
☞
Note:
● To display motion detection information, a camera that supports the
function of adding motion detection information is required. For more
information about this function, refer to the Operating Instructions of the
camera.
Note:
● To use the time-saving playback, a camera that supports the motion
detection information addition function is required. For more information
about this function, refer to the Operating Instructions of the camera.
(When motion detection information is set to "Off" or recorded by our or
Panasonic cameras that do not support motion detection information
setting, the camera will playback at high speed regardless of whether there
is motion or not.)
● The time-saving playback only functions when the image is played back at
the actual size on 1-screen ~ 4-screen.
● When the time-saving playback functions in the fast playback mode,
is displayed. During this time, no audio is output.
● When an image is played with a recorded time close to the current time,
fast playback is not available.
● When the image capture size and the frame rate of the recorded image are
high, the fast playback may not be available. In addition, the playback
speed of each image may not be the same during multiscreen playback
depending on the setting values of the image capture size and the frame
rate of each recorded image.
286