i-PRO WJ-NX510K Series Operating Instructions Manual page 306

[Operation via recorder's main monitor]
Step 1
Connect an external storage device to the copy port [COPY] of the recorder.
Step 2
Click the [Copy] button on the operation panel of the main monitor.
→ The copy panel will be displayed (if in playback mode, playback will be paused).
set for copying.
● Copying of recorded images may sometimes be performed incorrectly
when there exist 2 or more images recorded at the same date & time
resulting in change of the date & time setting or the auto time adjustment
function.
● In the following cases, the copying currently being performed will stop.
・ When any of the settings of the recorder is changed
・ When a user who started manual copy logged out (It will take around
90 seconds until copying is stopped after the web browser is closed.)
・ When the original data (source for copying) is lost (overwritten or
malfunction of the hard disk drive.)
● For the data copied to the NAS, it is not possible to playback on the
recorder. Also it is not possible to display the image list copied to the NAS
on the recorder or the web browser.
302