i-PRO WJ-NX510K Series Operating Instructions Manual page 299

[Operation via recorder's main monitor]
Step 7
To stop playback and return to live images, click the stop button on the playback operation
panel.
→Playback will stop, and live images will be displayed.
Search and play recorded images triggered by motion detection (VMD
search)
Search images recorded with a camera supporting the VMD search function by the date
motion was detected and play them. Click a date & time on the result list to play
corresponding recorded images.
Step 1
Click [Search] button on the playback operation panel and click [VMD] tab.
→ The VMD search panel is displayed.
Note:
● You can start the playback by double-clicking a thumbnail that you want to
play back.
Note:
● The following operation can also be used to stop playback and display live
images.
● Click the [x] button on the date & time operation panel (playback display)
● Click the [Current time] button on the date & time operation panel
(playback display)
● Change the playback media
Important:
● To perform the motion detection search, a camera that supports the
motion detection information addition function is required. For more
information about this function, refer to the Operating Instructions of the
camera.
295