i-PRO WJ-NX510K Series Operating Instructions Manual page 344

[Operation via PC web browser]
Function Function Description Operation
Zoom The camera image
will be enlarged or
compressed in the
display.
Focus Adjusts the focus of
the camera image.
Brightness Adjusts the aperture
of the lens.
Preset Registers the current
registration camera orientation to
the selected preset
position.
Preset move Moves the camera
orientation to the
position preset in the
preset registration.
Auto mode Activates the Auto
mode function set in
the camera.
Click the [-] button or the [+] button. Click the [×1] button to
return the zoom magnification to 1×.
Click the [Far] or [Near] button. Click the [Auto] button to
automatically adjust the focus.
Click the or button. Click the [Standard] button to return
brightness setting to standard.
Pan/tilt the camera to the desired orientation.
Click the [▼] button in the Preset box, select the preset number
(1 to 256) you wish to register, and click the "Register" button.
Note
● Some preset numbers cannot be registered depending on the
connected camera model.
● "Home" cannot be registered.
Click the [▼] button in the Preset box, select a preset number
(Home, 1 to 256), and click the "Move" button.
Select "Auto mode" as the operation mode and click the [▼]
button to select the following camera's auto mode. Click the
[START] button to start the camera in Auto mode. Click the [Exit]
button to exit the Auto mode.
● Auto-Following/Tracking: The camera automatically tracks
moving objects on the screen.
● Auto Pan: The camera automatically rotates within the range
of the pan start and end positions set in advance.
● Preset Sequence: Moves through the preset positions
registered in advance in the camera, starting with the lowest
preset number.
● Patrol: Performs the operations recorded in advance by the
camera.
Note
Set the Auto mode in the camera menu before use.
" "
340
]