i-PRO WJ-NX510K Series Operating Instructions Manual page 273

[Operation via recorder's main monitor]
Functi Function Description
on
Mask Sets the mask area of the
area camera.
setup
Zoom/ Adjusts camera zoom and
Focus focus.
adjust
ment
Initial Tilts the omnidirectional
positio camera, adjusts the
n vertical angle and adjusts
setup the image cropping
position horizontally.
Operation
Click the [Set] button on the advanced camera control panel. When
you click the [Start] button in [Mask area] on the displayed camera
setup screen, a grid-like boundary line is displayed in the image
display area, and the squares set as the mask area become white and
translucent.
Click a square in the image display area to switch the mask setting for
that square On/Off.
Click the [End] button to end the mask area setting and erase the
lattice border.
Click the [Back] button to return to the advanced camera control
panel.
Note
Click the [Reset] button to clear all mask settings.
Click the [Set] button on the advanced camera control panel. Click
the [Set] button in [Zoom/Focus adjustment] on the displayed
camera setup screen. Click the [-] [x1] [+] buttons on the displayed
zoom/focus adjustment screen to adjust the zoom. Also click the
[Zoom in] [Reset] [Zoom out] buttons to adjust the focus.
Click the [Back] button to return to the camera setup screen.
Click the [Set] button on the advanced camera control panel. Click
the [Set] button in [Initial position settings] on the displayed camera
setup screen.
Adjust the position by clicking various buttons or directly on the
image on the displayed initial position setting screen.
Click the [Save settings] button to save the adjusted image position in
the camera.
Click the [Back] button to return to the camera setup screen.
269