i-PRO WJ-NX510K Series Operating Instructions Manual page 154

[Setup via recorder's main monitor]
** indicates a user name or an IP address.
About the operation log
The operation log displays specific operations of the recorder and their dates and time in a
list.
Up to 500 logs are saved.
When more than 500 logs are filed, the older logs will be overwritten by the newer logs.
CONFIG LOGIN / CONFIG LOGOUT: A host has logged in/out the "HDD management"
UPDATE SETTINGS: Settings have been changed.
POWER ON: The power of the recorder has been turned on.
POWER ON(UPDATE): The recorder is rebooted after the software is updated.
BEFORE TIME CHANGE MANUALLY: Before the system clock has been changed
AFTER TIME CHANGE MANUALLY: Just after the system clock has been changed
BEFORE TIME CHANGE BY NTP: Before the system clock has been changed by NTP
AFTER TIME CHANGE BY NTP: Just after the system clock has been changed by NTP
HDD FORMAT: The HDD has been formatted.
RESET ALL SETTINGS: The settings have been reset.
POWER ON (MAINTENANCE): The recorder has been rebooted by the operation of the
RESET HIGHEST TEMPERATURE: The highest temperature information has been cleared.
POWER OFF: When the power to this product is turned Off.
REGISTER FOR REMOTE MONITORING: When registration for remote monitoring is
POWER ON(REMOTE): when restarted by remote monitoring operation.
CAM** RESET(REMOTE): when the camera is restarted by remote monitoring operation.
About the network log
The network error logs (occurrence date & time and error details) will be displayed in list
form.
Up to 100 logs are saved. When more than 100 logs are filed, the older logs will be
overwritten by the newer logs. In this case, the oldest log is the first to be overwritten. Refer
setting menu.
Note:
● If power is turned off during startup, POWER OFF will not remain.
page.
completed.
150