i-PRO WJ-NX510K Series Operating Instructions Manual page 285

[Operation via recorder's main monitor]
Function
Next record/Previous
record button
Go to last button
Playback status display
Wide view button/Ctrl
screen button
Playback operation panel
switch button(Displayed
during playback on a full
screen)
About captured images
The images captured by clicking the image capture button and saved on a USB medium will
not be displayed with this recorder.
To display those images on a PC monitor, the data format and destination to save are as
follows:
File format for recorded images: JPEG (DPOF-compatible)
Destination to save: USB storage DCIM¥100_DATA¥P1000001.jpg
* The folder will be created from 100_DATA to 999_DATA. If the folder already contains the
file P1000999.jpg, a folder with a new number will be created.
Example Operation
Clicking the next record button will play back the next later
recording.
Clicking the previous record button will play back the next
earlier recording.
When there is no next/previous recorded image to be
skipped to, the current playback will continue.
When this button is clicked, playback of the latest recorded
images will start. The starting point is around 30 seconds
before the date & time of the latest recorded images.
The status of the recorder such as the playback status, pause
status etc. will be displayed.
The playback speed will be displayed in fast forward/fast
reverse mode.
Clicking the button during playback stops the playback and
displays the live image in the wide view/control screen.
The playback operation panel will be hidden when the
playback operation panel is displayed. Clicking the button
again will return to the original display.
Clicking the button during the live image display will start
playback and displays the playback operation panel.
P1000002.jpg, ...
281