i-PRO WJ-NX510K Series Operating Instructions Manual page 52

[Setup via recorder's main monitor]
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
Set up Light control mode [Light control mode]
Select how to control the amount of light for each camera and transmit the information to
the cameras to change the camera settings.
Clicking the [Setup >] button for "Light control mode" on the [Camera setup] tab will
display the setup page.
[Light control mode]
Outdoor scene: Depending on the brightness level (illuminance), the iris will automatically
Indoor scene (50Hz): The shutter speed will automatically be adjusted to prevent flicker
Indoor scene (60Hz): Same as "Indoor scene" above. (For 60 Hz areas)
ELC: The iris will automatically be controlled with the shutter speed adjustment to control
light.
be controlled together with the shutter speed adjustment to control light.
caused by fluorescent light. (For the 50 Hz areas)
48