i-PRO WJ-NX510K Series Operating Instructions Manual page 151

[Setup via recorder's main monitor]
[HDD hour meter warning]
If the operation time of a hard disk drive reaches a specified level, a warning will be
performed. When "Off" is selected, warning will not be performed.
Off/ 10000 h/ 20000 h/ 30000 h/ 40000 h/ 50000 h
Default: 20000 h
[Auto data delete]
Select to determine how many days should have passed from the recorded day to delete
data automatically from the hard disk drive.
Off/ 1 day/ 2 days/ 3 days/ 4 days/ 5 days/ 6 days/ 7 days/ 8 days/ 9 days/ 10 days/ 14
days/ 30 days/ 45 days/ 60 days/ 90 days/ 120 days/ 150 days/ 180 days/ 184 days/ 365
days/ 366 days/ 730 days/ 731 days
Default: Off (Does not delete the data automatically.)
[Camera time auto synchronization]
When a date changes, the clock of the cameras will be synchronized with the clock of this
product.
On: Synchronized
Off: Not synchronized
Default: On
● It may take time to play the data in the inactive HDD during the HDD
stand-by control mode.
● During the HDD stand-by control mode, the date will not be displayed in
white on the calendar of the date and time operation panel even if there
isa recorded image.
Play image recorded at a designated date & time
☞
● The number of recording event search is not displayed during the HDD
stand-by control mode.
Search and play recording events (REC event search)
☞
Note:
● The auto data delete will be performed at 0:05. If the power is not turned
on at this time, the auto data delete will not be done.
● If the recording group is set, the auto data delete will not be performed.
147