i-PRO WJ-NX510K Series Operating Instructions Manual page 275

Hide thumbs Also See for WJ-NX510K Series:
Table of Contents

Advertisement

[Operation via recorder's main monitor]
Event action
Alarm
Move the camera to the
action
preset position
Blink the alarm indicator
Sound the buzzer
Outputs alarm signals
Display event information
on the main monitor*3
Display the alarm icon on
a web browser*3
Display the alarm
message on a web browser
Record the alarm logs*2,
*3
Send a mail that notifies
of an event occurrence
Provide an alarm
notification to a PC
according to the TCP
alarm notification setting
Notify PC of alarms
according to HTTP alarm
settings
Display the images on a
1-screen when an alarm
occurs
*1 ○: Takes action regardless of the setting, ●: takes action in accordance with the setting,
Description
Move the camera to the preset position registered in
advance.
The alarm indicator on the front panel will start blinking.
The buzzer will start sounding for the duration set in
advance.
Output signals will be sent from the ALARM/CONTROL
connector at the rear of the recorder.
The event type and terminal/camera number will be
displayed on the status display panel. At the same time,
the alarm button turn red.
The alarm icon will be displayed on the event error
display area of the web browser.
A window that notifies of an event occurrence will be
displayed on the web browser.
* The alarm message displayed last has priority. To close
the window, click the [×] button.
Date & time of the event and event information will be
recorded in a log list.
An e-mail notifying of the event and its date & time
(alarm mail) will be sent to registered e-mail addresses
(up to 4).
When an event occurs, a notification will be sent to a PC
in accordance with the settings made under [TCP alarm
notification]. (☞
Configure the advanced settings for
schedule recording [Advanced schedule
Configure the TCP alarm notification settings [TCP alarm
notification])
When an event occurs, the PC is notified of the event
according to the "HTTP alarm" settings.
HTTP alarm notification settings [HTTP
Display the images recorded by the camera associated
with the alarm number on a 1-screen
271
Mode*1
A
setup],
(☞Configure
alarm])
B
C
● ×
×
×
×
×
×
×
×
×
○ ×
×
×
● ●
×
×
×
×
×
×
×
×

Advertisement

Table of Contents
loading

Table of Contents