i-PRO WJ-NX510K Series Operating Instructions Manual page 359

[Operation via PC web browser]
[Camera]
Select the camera you wish to copy. Mark the checkbox next to the desired camera. When
the checkbox for [All] is marked, the checkboxes of all cameras can be marked.
[Date & time range]
Designate the start point (start date & time) and the end point (end date & time) of
recorded images to be copied. Click the [▼] button, and then designate date & time.
[File format]
Select the file format (Original (n3r/n3a)/MP4) of the recorded data to be copied. Mark the
checkbox corresponding to the desired file format.
[Alteration detection]
Determine whether or not to attach the alteration detection code to the recorded images
to be copied.
When the alteration detection code is attached, it is possible to check if the copied
recorded images have been altered or not when playing the copied recorded images using
the viewer software. Click the [▼] button, and then select "On" or "Off".
355