i-PRO WJ-NX510K Series Operating Instructions Manual page 131

Hide thumbs Also See for WJ-NX510K Series:
Table of Contents

Advertisement

[Setup via recorder's main monitor]
operating certain functions, do not check the respective function. The setting for the
administrator cannot be changed. The system can also be set up to allow only live
operation (image switching) after logout.
Restrictable operations
It is possible to allow or restrict the following operations for each user.
Operation
Camera operation
Camera control
Search and playback
Copy
Alarm reset
Error reset
Setup
Camera image display
* It is recommended to restrict "Setup" to the manager/administrator.
Note:
● Only a user logged in as "Administrator/Manager" can change the user
level settings.
● At the default, operations allowed at the user level are as follows:
  Administrator/Manager: Possible to perform all the operations
 Operator: Possible to perform a part of the settings of the recorder and
alarm reset (Head of operators)
  Viewer: Possible to monitor or play the images (Operators)
  * Administrators and managers can perform all operations. The difference
between an administrator and a manager is that an administrator has
priority over a manager; if both perform the same operation at the same
time, that of the administrator will have priority.
● The screenshot shows the default.
● When a user tries to operate a function that is not checked (restricted
function), the login window may sometimes be displayed to prompt a user
with the required user level to log in.
Description
Camera images displayed on the main monitor can be changed.
Camera control such as panning and tilting can be performed.
Recorded images can be played back and searched by VMD search.
Recorded images can be copied to storage media such as a USB.
An alarm action can be canceled.
An error action can be canceled.
Setup menus can be displayed and the settings can be configured.
Images from each camera can be displayed. To set up the display of camera
images, click the [Setup >] button.
(☞
Configure the basic settings relating to user management
(Administrators)
127
[Basic])

Advertisement

Table of Contents
loading

Table of Contents