i-PRO WJ-NX510K Series Operating Instructions Manual page 309

[Operation via recorder's main monitor]
Step 4
Click the [Copy] button on the copy panel.
→ If [Assign a password] is set to "On", the password entry screen will be displayed.
Otherwise proceed to Step 6.
remaining volume, it means that over 10000 of recorded data exists as target.
Note:
● Images recorded in H.264 or H.265 can be copied in MP4 format. If audio
is recorded in AAC-LC, the image is copied in MP4 format with audio.
● Copying and downloading in MP4 format are available for up to 2 users at
the same time.
Download recorded images currently being played
☞
● To attach a code for alteration detection, click the [Advanced] button. On
the advanced setup window, set [Attach the alteration detection code] to
"On".
● When you assign a password to the data that you will copy, click the
[Advanced setup] button and set "On" for [Assign a password] on the
displayed advanced setup screen.
● Click the [Advanced setup] button and then click the [Back] button on the
displayed advanced setup screen will return to the copy panel.
305