i-PRO WJ-NX510K Series Operating Instructions Manual page 262

[Operation via recorder's main monitor]
(when displaying on the 4-screen, select the camera whose image is to be zoomed)
Step 2
Click the digital zoom buttons
→ The displayed image will be enlarged ×1, ×1.25, ×1.50, ×1.75, ×2, ×2.5, ×3, ×3.5, ×4, ×5,
×6, ×7, ×8 centering on the center point of the screen.
Digital zoom buttons
Step 3
Click the digital zoom button
the Step 2.
Displaying images on a wide view
Step 1
Confirm that the image display area is set to the 1-screen.
Step 2
Use the mouse wheel.
→ Zooming is switched by ×0.25 from ×1 to ×2, by ×0.5 from ×2 to ×4 and by ×1 from ×4
to ×8 centering the position of the mouse cursor.
.
Note:
● Clicking a point in the zoomed image makes the clicked point the center of
the image.
● If "Enable camera control with mouse" on the camera control panel is not
checked, the digital zoom factor can also be changed by placing the cursor
on the image in the image display area and turning the mouse wheel. In
this case, the point where the mouse cursor is positioned will become the
zoom center.
Camera control panel
☞
to zoom out the image by the magnification opposite to
Note:
● Digital zoom is automatically canceled by other operations such as
selecting another camera or changing the screen pattern.
258